S D Construction Specialist

Description
Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in
liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing
of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces
shrinkage, prevents cracking, dust pick up & improves abrasion resistance.Features
}} Multipurpose – It is multipurpose & economical product, easy to use.
}} Cracking – It prevents cracking by improving flexural strength.
}} Hardness – Improves the hardness & prevents dust generation.
}} Shrinkage – Reduces drying & aging shrinkage cracks.
}} Bonding – Bonds strongly to concrete, masonry, stonework, plasters, cementitious surfaces.
}} Erosion & corrosion – Improves erosion resistance & prevents corrosion.
}} Abrasion resistance – Improves abrasion resistance of the cement mix.
}} Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding

Dr. Fixit Pidifin 2K is applied to waterproof and protect concrete and masonry substrates. Dr. Fixit Raincoat WPC is used as a waterproof coating on existing and new surfaces.

Multipurpose – It is multipurpose & economical product, easy to use. Cracking – It prevents cracking by improving flexural strength } Hardness – Improves the hardness & prevents dust generation. Shrinkage – Reduces drying & aging shrinkage cracks. Bonding – Bonds strongly to concrete, masonry, stonework, plasters, cementitious surfaces.

Yes, I would like to receive important updates and notification on WhatsApp

By proceeding, you are authorizing Dr. Fixit and its empaneled contractors to get in touch with you through

Dr. Fixit Pidiproof LW+ is specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters.  It makes concrete cohesive and prevents segregation.
Method of ApplicationCharge cement & aggregates to concrete mixer as per the mix design, mix in dry state for 1–2 minutes. Start addition of 75–80% mixing water & mix for 2-3 minutes. Dr. Fixit Pidiproof LW+ is added as per the recommended dosage into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes. Place the concrete or apply plaster, as needed. Cure the applied mortar or concrete as per good construction practices

Fixit Pidifin 2K is 2 parts polymer-modified flexible cementitious waterproofing membrane coating specially formulated for Concrete and Masonry Surface which is supplied in ready-mix kits (2 parts).