S D Construction Specialist

To minimise permeability and increase the waterproofingproperties of concrete and cement sand mortars for criticalapplications like roof slabs and screeds, basements, externalplastering, bathroom floors, water tanks, sumps, drains etc.

Conplast WL is a dark brown liquid based on lignosulphonates which mixes readily with water and therefore disperses evenly. Conplast WL waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more effi cient compared to traditional powder waterproofers as its use results in two fold improvement of concrete or mortar.

Every concrete manufacturer wants to produce high quality concrete, while achieving better consistency, productivity, innovation and cost-effectiveness. Fosroc has developed a wide range of technically superior solutions for the entire concrete industry – with solutions that cover every stage, from initial technical work right through to the final application.

Fosroc is a leader in concrete admixtures, with tailor-made formulations carefully designed for specific customer use. Our renowned Aura, Structuro and Conplast series deliver high quality, exceptional performance and cost-effective solutions for concrete producers all over the world.

Fosroc manufactures and supplies:

Product Description
Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fi llers are designed to assist uniform mixing and produce a consistent grout.

Nitobond SBR(Latex) is modified styrene butadiene emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.

 Free fl ow, high strength, non-shrink, cementitious precision grout Uses Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be grouting of base plates of turbines, compressors, boiler feed pumps, bridge bearing pedastal applications & other critical applications. It can be used for anchoring a wide range of fi xing i.e masts, anchor bolts and fence posts.. Advantages Gaseous expansion system compensates for shrinkage and settlement in the plastic state No metallic iron content to cause staining Pre-packed material overcomes onsite batching variations Develops high early strength without the use of chlorides High ultimate strength ensure the durability of the hardened grout Free fl ow ensures high level of contact with load bearing area Resistant to oil Standard Compliance Conbextra GP2 conforms to ASTM C1107 (Standard Specifi cation for Packaged Dry, Hydraulic-Cement Grout (Non-shrink). Description Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free fl owing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fi llers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fi llers are designed to assist uniform mixing and produce a consistent grout. Technical support An experienced technical advisory team is available to give technical service on request